Jump to content
Sign in to follow this  
Super

Lighting accuracy and ceiling turns blac

Recommended Posts

Hi Guys!

 

I'm trying to recreate this gallery. I have built it form the original floor plans and elevation plans, so I know my lights are in accurate places. I tried lighting the scene, but it comes out blue, still dark, and the ceiling turns black. I've tried changing the lights to all the types (omni, directional, etc) I've even tried adding material to the 3d lights to make them emitters. I'm a little stuck at this point. I know it's possible to achieve an accurate result, I've seen it done here before, I just need to be pointed in the right direction. Please see attached files. 

 

This is what its supposed to look like.

691881715_ScreenShot2018-10-31at3_48_18PM.thumb.png.3252523668396fa8a59855915707dba1.png1721060922_ScreenShot2018-10-31at3_48_13PM.thumb.png.58e4c2a913246e9678270baba114f111.png

This is what I am getting.

 

1891443241_GGalleryTEst.thumb.jpg.419394cfae31a1c9931091cfd3fdadd9.jpg

 

Thank you!!!

Share this post


Link to post
7 hours ago, Super said:

This is what its supposed to look like.

Hello, 

I am not sure what you did to your lights, but even taking one of them to a new scene make it light one side only. When I created a new light it worked perfect, so my advice it create new lights in a new scene and make sure the settings you use don't change how they behave then transfer them back in your original scene.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...