Jump to content

Sign in to follow this  
Anafree

problem when split apolygon using spline

Recommended Posts

Hi



i can't get outside bevel on 2 side
always i get reverse bevel on the back side

Share this post


Link to post

This is really strange.  After reversing the normals and doing a bevel then undoing the normal go back to what they were before reversing.  So on that one side what is happening is on bevel it is reversing the normals for some odd reason.  I even went to the mesh checking under the modeling settings and it shows nothing.  Optimizing does nothing.

 

One work around I did find to get a good mesh and have it bevel right is to take the side having problems and triangulate it.  This will stop the glitch.  You can even make it into a ngon again after triangulating and it will still bevel correct.  If I was to guess I would say the knife cut was still partially active in some way which was making the ngon flip on bevel.

 

Send this video to MAXON though so they can fix it.

Share this post


Link to post
  • Topic Author
  • 16 minutes ago, Fastbee said:

    This is really strange.  After reversing the normals and doing a bevel then undoing the normal go back to what they were before reversing.  So on that one side what is happening is on bevel it is reversing the normals for some odd reason.  I even went to the mesh checking under the modeling settings and it shows nothing.  Optimizing does nothing. 

     

    One work around I did find to get a good mesh and have it bevel right is to take the side having problems and triangulate it.  This will stop the glitch. 

     

    Send this video to MAXON though so they can fix it. 

    Thank you Fastbee
    That what happend when i triangulate the back side 
    http://prntscr.com/lfpaz9
    Generally bevel tool  do not work well when the mesh have a many edges  in the corners
    i'll send my issue to MAXON, thank you again

     

    Share this post


    Link to post

    On the bevel tool change the Mitering from Default to Uniform.  The other option would be to make that poly into an ngon again before beveling.

    Share this post


    Link to post
  • Topic Author
  • Thank you again Fastbee
    http://prntscr.com/lfpj0i

    i tried to use all Mitering  options but nothing helps.

    Share this post


    Link to post

    You have to triangulate the one problem side to make it bevel right.  After that to make it have the right corners when beveling you can either change the Mitering to Uniform or make that side a ngon again.

    Share this post


    Link to post
  • Topic Author
  • Worked like a charm
    http://prntscr.com/lfvzyw

    Thank you so much Fastbee

    Share this post


    Link to post

    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.

    Guest
    Reply to this topic...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

    Sign in to follow this  

    • Recently Browsing   0 members

      No registered users viewing this page.

    ×
    ×
    • Create New...