Jump to content
Sign in to follow this  
Eric Brown

Polygon Shader Problem

Recommended Posts

  • Topic Author
  • Hey man, so I am now trying to model the rest of the heart camera (the one on the top from the picture below) I just boundary loop selected the end of the tip and extruded all the way down for the rod, I tried using parametric modeling for the rest but as you can see I'm running into some weird shape issues when I use the loft, I also tried to keep extruding from the rod but ran into some weird problems whenever I tried to change the degree of the extrude too many times, I'm guessing I should just make a new cube object, create 2 circles on either end and extrude out from there, followed by rounding the edges off of the square with a bevel?  Or maybe I could use a boole I guess?

    Screenshot (12).png

    3536024_rdax_80.jpg

    Share this post


    Link to post
    Share on other sites

    You're making life unnecessarily hard for yourself there. Always build things in the same parts as they are in the real world, and if those reference pics are anything to go by the cubic connector sections can be different objects to the surrounding pipework in all 3 directions. I would build each of the little parts separately, out of regular polygon objects, no need for booles, lofts or anything else...

     

    For that cubic bit in the middle I'd proceed like so...

     

    Junction.thumb.jpg.c32c6fa83a3753a00c26273cae95a7c6.jpg

     

     

    1. Get a cube, and using Line Cut, make diagonal cuts between points on all 3 faces that you want to be circular.

    2. Then select the centre vertices of those 3 sides, and bevel them  (chamfer, 0 subdivisions) to get circle outlines as shown.

    3. Line Cut again, and cut the centers into quads. Now select the polys that comprise the circles on all 3 faces, and Normal Move them out a bit.

    You can inner extrude them a little as well to get some control loops for later.

    You can then repeat steps 2/3 as needed to get the elongated oval bits on the other 2 sides like I have there.

    4. Now Edge Mode and select the perimeter borders of the cube (just them). Bevel those with 1 segment in solid mode.

    5. Place Under SDS.

     

    CBR

    Share this post


    Link to post
    Share on other sites
  • Topic Author
  • Hey man so i did what you said and then used the slide and normal move method to create a shape more similar to the product, I'm still trying to get the details down, is there any other non-destructive way I can move points, edges or polys besides using "Slide or Normal Move".

    Screenshot (14).png

    Share this post


    Link to post
    Share on other sites

    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.

    Guest
    Reply to this topic...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

    Sign in to follow this  

    • Recently Browsing   0 members

      No registered users viewing this page.

    ×
    ×
    • Create New...