Jump to content
Sign in to follow this  
munkittrick

Extrude cylinder selection a single axis

Recommended Posts

On 1/17/2020 at 10:12 PM, munkittrick said:

My main problem is the fact that the new cuts made with the knife tool or knife path tool don't follow the original body lines of the primitive, thus making the ART of getting precisely matching edges almost impossible. Thank again!

 

If you do have R18 like your profile says, then the cuts you make with Loop cut should totally match the curvature , which ever mode you are in, Edge distance or Proportional, because the perimeter loops are the same shape both ends. Here they are doing it !

 

Loop_Cut.thumb.gif.252c7d22996c5ec1735c622cd04ba89e.gif

 

CBR

 

 

Share this post


Link to post

I apologize. Didn't think of that. So as mentioned already, ctrl drag and then Loop Cut.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...