Jump to content

Recommended Posts

Hi, hope you all safe in this condition

I am pretty new to c4d character modelling. I am have a pretty hard time creating "fat roundy cartoon hand and finger" 

Any suggestion on tutorial for me to start learning.

Thanks a lot

Stay safe all

Share this post


Link to post

Can you post a reference, always have a good reference at hand.

 

Dan

Share this post


Link to post
  • Topic Author
  • Something like this, simple and cute

     

    Share this post


    Link to post

    Always check the youtubes 😉

     

     

    NOte: Hypernurbs is the old name for what is now more correctly called a Subdivision Surface Object.

     

    CBR

    Share this post


    Link to post

    Hi

     

    To model from a reference your going to need to find a much better one than that, although I could get the idea from that as its simple, but for your own reference find some decent ones above, side e.c.t.

     

    I just did this basic quick hand it into timelapse with narration.  Take the principle from it that you dont need many tools.

     

     

    Dan

    basic hand.jpg

    basic hand 2 cartoon.jpg

    Share this post


    Link to post

    Hey @chrustygesang i'll put a little something together quick to show you how i make a very basic cartoon hand, been a while so might take a minute or two, probably ten :D 

    Share this post


    Link to post

    Nice to see you around, Sir @VECTOR

     

    CBR

    Share this post


    Link to post
    1 minute ago, Cerbera said:

    Nice to see you around, Sir @VECTOR

     

    CBR

    Should be back a bit more now I hope

    Share this post


    Link to post

    I start off with a hexahedron sphere with 8 segments, I then cut it in half so you're left with a hemisphere shape. You could also use a cylinder for this. I then extrude it to the desired length.

    1.thumb.jpg.e55b186bff424a11fbcaac7ad1842696.jpg

     I then duplicate that 4 times, Rotating them slightly until they're in the desired position, Then change the length, Thickness etc accordingly.

    2.thumb.jpg.025929d626a071de9e3756ad7e3e428c.jpg

    I then drop in an 8 sided disk, Make it all quads by removing the 4 diagonal cuts, Do an inner extrude and delete the centre then extrude 2 edges ether side of the disk around to make the outside of the hand.

    3.thumb.jpg.dec4c142a8d44fe96fa17585fe99bae8.jpg 

    4.thumb.jpg.1bbd1243c0d5174306f31957f885c789.jpg

    You now have the basic hand shape. Just a matter of connecting all the pieces together and filling in the top and bottom with polys, And extending the disk into a wrist. If you align everything carefully you should have the correct amount of segments to connect most of it without having to create loads of additional cuts, Although you will have to make a few. Then just add some additional cuts for the joints and the finished product should look something like this, Although i'm sure you can do a better job than my rushed attempt.

    5.thumb.jpg.172d6fc90a8b3d18e29a8b957c7d605f.jpg

    6.thumb.jpg.c3ea6426d137e7974356464ee73a94f6.jpg

    Share this post


    Link to post
  • Topic Author
  • Its really a huge help sir @VECTOR

    Thank you sooo much

    Thaaaanks a loot

     

    Stay Safe everybody

    Share this post


    Link to post

    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.

    Guest
    Reply to this topic...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

    Sign in to follow this  

    • Recently Browsing   0 members

      No registered users viewing this page.

    ×
    ×
    • Create New...