Jump to content

Archived

This topic is now archived and is closed to further replies.

Richart

Sweepnurbs And Selection Set

Recommended Posts

  • Topic Author
  • Hi everyone,

    I always thought that you could not make selection sets on a SweepNurbs for example.

    Well I was wrong.

    Take a look at the video from JeremyW and Find out that this is possible.

    Although this trick seems to be broken in R10. It works with R9.6.

    I've tried it with both, R10.111 it won't work, R9.6 it works.

    In this video he use it with the Extruder from MoGraph, but it works with a normal SweepNurbs So MoGraph is not needed for this trick.

    The complete thread can be found on CGTalk. LINK

    Peace,

    Rich_Art. wink.gif

    Share this post


    Link to post
    Share on other sites

    Guest dataflow

    it works in 10 (sort of)

    if you do the same without the "extrude object"

    and add a material to the "sweep nurbs" it works just like it was editable

    Share this post


    Link to post
    Share on other sites
  • Topic Author
  • Yes that works, but the part with the Mograph Extruder does not work in R10.X.

    At here it won't work. To bad..... It would be very handy.

    Peace,

    Rich_Art. wink.gif

    PS: I wrote loftNurbs, But I meant SweepNurbs.

    PS2: MMM I can't get it work in R10, even with a simple selection set and a Current state to object SweepNurbs.

    Share this post


    Link to post
    Share on other sites
    Guest dataflow

    i got it to work

    Share this post


    Link to post
    Share on other sites
  • Topic Author
  • Well that is real strange....

    See image, here it does not work..... Are you on a MAC?

    Peace,

    Rich_Art. wink.gif

    Share this post


    Link to post
    Share on other sites
    Guest dataflow

    did you try it the same as my hierarchy?

    yours is different

    Share this post


    Link to post
    Share on other sites
  • Topic Author
  • Yes I tried but that does not make any different. And it should working this way too, as you can see in the Mov from JeremyW.

    Do you have the latest version of C4D? R10.111

    Peace,

    Rich_Art. wink.gif

    Share this post


    Link to post
    Share on other sites
    Guest dataflow

    no mine is demo

    this is just incase you havent laugh.gif

    but did you remember to drag the selection into the selection field of the extrude object selection field sc018.gif

    Share this post


    Link to post
    Share on other sites
  • Topic Author
  • Haha ok, yes I drag it in there. I'll guess it is a bug with the R10,111 update... Bummer.

    SREK................................help please. lol

    Peace,

    Rich_Art. wink.gif

    Share this post


    Link to post
    Share on other sites

    Something is changed or broken in 10.111 or possibly the revised MoGraph Extrude Object.

    The transferred virtual selection is not being respected and only a single polygon is being extruded.

    It looks as if it is the polygon with Index ID 1.

    Tried it in V9.6 and it seems to work OK.

    BTW, I'm on a Mac.

    Cheers, Alan.

    Edit: I saved the 9.6 file and it opened correctly in 10.111.

    Share this post


    Link to post
    Share on other sites
  • Topic Author
  • Yes same over here, when I make it with R9.6 it works ok. So I can make it with R9.6 and save and open with R10.X that works indeed.

    Should be working in R10.111 also. I hope they will fix this again.

    I learned something new and now I can't use it with R10.X alone.

    Peace,

    Rich_Art. wink.gif

    Share this post


    Link to post
    Share on other sites

    Bug hunts are such fun. makmiday.gif

    Cheers, Alan.

    Share this post


    Link to post
    Share on other sites
    Guest
    This topic is now closed to further replies.

    • Recently Browsing   0 members

      No registered users viewing this page.

    ×
    ×
    • Create New...