Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 03/14/2019 in all areas

  1. 6 points
    just finished this :) @Cerbera sorry for the caps in the topic title, but the title of the video just required it ;)
  2. 6 points
    Folks that are speculating here and via pm, here is a simple answer. Adobe is not buying Maxon - simple as that. Not sure how on earth can anyone conclude that given this development? This, if anything nullifies such assumptions... If Adobe ever wanted this then probably good time for them was 10 years ago, certainly not now, and to best of my knowledge, and I was saying this every year when this comes up - C4D is not for sale. It is simply silly for Nemetschek to sell such a valuable and growing company. Anyone can find financial results of companies online, this is simply publicly available information. Now, I am looking forward to open some accounts for Redshift folks ;)
  3. 5 points
    Fancied a quick little personal weekend modelling project, so thought I'd do the Golden Snitch from Harry Potter. Painfully easy to do with either Volume builder or Sculpting, I fancied more of a challenge so I did it properly, with SDS. Here we are at the end of Day 1, most of the modelling done, but no textures yet... 100% quads, but still the odd 6 point pole remaining, not that it creates any artefacts here :) Of course it's different in every film, and you can tell they didn't know it was going to have to open until film 6, but I'm doing the film 3 version, arguably the best of the series because Alfonso Cuaron was in charge... Texturing tomorrow... CBR
  4. 5 points
    Can finally show some work I did for the Walking Dead Season 9 last year. This was a pretty dreamy project. The props department needed a sword designed for the Jesus Monroe character. They gave me basic dimensions that they had tested out with the actor and some research from the comic and previous action figures and then I was let loose from there. I designed three different options - this is the one they ultimately went with. Stitching, seams, etc in the renders could be better overall, but the whole thing went together in just two days.
  5. 5 points
    Created for fun.. Software used: Zbrush, Rizom UV, Substance Painter, Cinema 4D and Redshift
  6. 4 points
    Dave is very cool and grounded guy, he never talked with any of us at Maxon with a bossy attitude. We truly believe he is capable to lead is in a better future.
  7. 4 points
    10 min keynote from the new MAXON ceo! Just announce the big news and wrap it up. I like his style! Tim Cook can learn something from this.
  8. 4 points
    Don’t we all love the guy who pops out of nowhere to ask a question and then doesn’t even take the time or courtesy to reply back after he’s received a thoughtful answer. I say some sort of acknowledgment or maybe even a ‘thank you’ is required operating procedure for anyone seeking help. People providing help are getting nothing out of it 98% of the time. At least honor a fellow human’s generosity for helping you. I think we sometimes are morally obliged to *not* help certain people. We owe it to ourselves to not be abused by the laziness, greed and opportunism of others.
  9. 3 points
    After the gold and fluttery-ness of my Golden Snitch, it seemed only logical to do a Quaffle next - I seem to be doing the set. In fact these Quidditch guys are great for an ongoing personal project in that if you don't have much time you can always just spend a free night doing 1 type of ball, and then come back to it later to add to the set... Still working on textures, but off to a fairly decent start... this one was Physical Render /GI - 3 mins. CBR
  10. 3 points
    Keyframe the dynamics on ? 3spheres.c4d
  11. 3 points
    You can always just setup such a scene yourself and then reuse it with different materials. It's really not a big deal and decent HDRI's are not really that expensive anymore. Here's some directions: HDRI Haven (Free) textures.com HDRI's
  12. 3 points
    Some workflow info: I really like the Volume builder and mesher for creating these smooth surface body parts. - Some retopo in 3D Coat - Marvelous designer for the neck part - Modeled and rendered in C4D off course - Redshift for rendering Still a lot to add
  13. 3 points
    Some music to help you pass time while rendering: Appropriately named too! May I also suggest this site: www.extrememusic.com Great site for production music where music is classified by mood, tempo, and style. In the mood for something to zone out to? Just type in "chill" to the search bar and up will come hundreds of tracks that will all stream to you one after the other WITHOUT ADS!!! Dave
  14. 3 points
    As a bit of a drone pilot myself, for a long time I have wondered when 3D mapping would get here. And indeed it just has ! DJI have just released Terra, which will turn your UAV footage into 3D digital assets complete with textures ! As a company I don't like DJI, and don't fly their machines myself (2 non-pilot-error flyaways mean I can't trust them), but they remain the people with the most budget to throw at ideas like this, and are surely the frontrunners of making it a consumer-level thing. Read more below... https://www.dji.com/uk/dji-terra CBR
  15. 3 points
    Oh you've come to the right place ! :) I modelled a diorama of Gandalf's Cutting a few years back... To get the frame of the circular door you just need to do some basic modelling. Get a disc object the same size as whatever you used to make your circular door, but make it slightly bigger, and then give it an inner radius of slightly smaller than the outer edge of the door frame. Then you can just select rows of edges and extrude them out in square form, like this... 1. Start with a disc. 16 segments is probably enough. 2. Edge Mode, Select the uppermost 4 edges, hold ctrl, and drag them out, then hold shift and scale them flat on Y. 3. Do the same for the sides, but this time scaling on X... 4. Close the gaps by extruding the edges next to them, using vertex snap to get them precisely aligned. Then weld the coincident points. 5. Add more extrusions to boundaries by ctrl-dragging with the move tool until you have the sort of dimensions you need, then, select all polys, get the Extrude tool, tick Create Caps and then add thickness to the wall by dragging right in the viewport... CBR
  16. 3 points
    I think this does it def main(): top = doc.SearchObject('boxes') boxes = top.GetChildren() count = len(boxes) boxes[0][c4d.ID_BASEOBJECT_GLOBAL_POSITION,c4d.VECTOR_X] = 0 for a in range(1, count): prev_pos = boxes[a-1][c4d.ID_BASEOBJECT_GLOBAL_POSITION,c4d.VECTOR_X] prev_rad = boxes[a-1].GetRad().x curr_rad = boxes[a].GetRad().x boxes[a][c4d.ID_BASEOBJECT_GLOBAL_POSITION,c4d.VECTOR_X] = prev_pos + prev_rad + 1 + curr_rad the boxes are under a parent called boxes, and in the for loop current position = previous position + prev radius + 1 + current radius result along X in this file, copy some boxes into the parent 'boxes' in OM box_arrange.c4d edit - same in XPresso. Select one obj and change width with scale tool to test. box_arrange_xp2.c4d AFAIK bounding box in XP doesn't use primitives only poly, but the GetRad() python method can do both.
  17. 3 points
    Hey all, I finished this model and here it is. Pretty fun but lots of challenges!
  18. 3 points
    If, like me, you use the modelling axis all the time, then it will probably have frustrated you on several occasions that there isn't a reset button there, and that r-clicking the field arrows didn't work here either, as recently as R19. I'm sure I wasn't alone in suggesting we fix that to MAXON, and I have just noticed that in R20 the right-click reset now works !! So, while we still haven't got the Reset button that would sort them all out in one click, we can at least now do it in 3 right-clicks, which is a lot better than manually moving the sliders to 0 with no quantization. So just giving my fellow modellers a heads up on that one, as it seems to been thought of as too minor to include in the R20 feature lists... But that's a biggie for me - will save a lot of time cumulatively, that one... CBR
  19. 3 points
    Thanks! I put another 6-8 hours into this model. I still have to do the "mouth parts" and clean it up before UV's and texturing. There are a lot of messy bits.... The butt was a pain in the.... but I think it's working now.
  20. 3 points
    Got a little farther along. I had a day of voice recording with my voice actor, Mike Luce this week. We did 2 scripts so I'll have stuff to work with for a while now. One thing I can't seem to remember is that when you scale the characters, the hair and fur don't scale with them! It took some time to get them looking right again!
  21. 2 points
    Triplanar is a neat solution if you have the setup already done. If not, or you can't be bothered to make it, then you can make a load of polygon selections, and apply the same material several times to different areas with different mappings. For example your objects above could use cylindrical, cubic and flat projections on certain parts of the model, and that's quicker to setup than either TPM or UVs... CBR
  22. 2 points
    Omg, thank you guys, I don’t know what I was doing. I must of pressed a hot key or something that put it in 2d mode I’m not sure. Now it’s working fine. I appreciate all your guys help!!! Much love guys
  23. 2 points
    You can't use that Grid Array mode and still get it to do what you want with the spline effector. You do have to abandon that, or at least produce a grid another way. For example what I showed you first was based on 3 grouped objects. But what if you replaced those with another cloner, in linear mode that just makes 3 copies of a single cube ? Then surely you have the best of both worlds - it's all parametric, and you can change numbers in either cloner ? CBR
  24. 2 points
    I'm trying to improve the accuracy and quality of my topology and model more components from the same polygon. So far it started with a disc.
  25. 2 points
    Yeah either you need $2,500 worth of Nvidia cards, or if you only have a fast CPU, there's Arnold and Corona. I personally use Corona and, even though I haven't upgraded to a modern CPU yet, it's remarkably fast. I'm running the old Mac Trashcan™, but it's still quick. I'm hoping to get that new elusive new Mac Pro they keep talking about, but even on an iMac Pro or a Windows machine with a Threadripper, Corona is as fast as any GPU engine. Plus, it's a fully raytraced engine so there are no compromises with certain effects. I also had Cycles and it was very slow on my hardware. If you only do 3D rendering and other video CUDA stuff, then a GPU solution may be worth it. If you do lots of other stuff on your PC that doesn't use two monster GPUs, then a AMD Threadripper setup will give you super fast CPU rendering with engines that support it, AND speed up everything else you do with that PC. Your choise.
  26. 2 points
    Very cool indeed. Funny since the industry we're in is so good now, at first I was asking myself if that was animated. Ha. I will always have a soft spot for Animusic though:
  27. 2 points
    I have an idea how you could improve it. Try running the hi-res original through a little application you can find called Instant meshes. This will retopologize it as quads, and allow you set a detail level and do poly reduction without compromising that. Very useful little tool that one... https://github.com/wjakob/instant-meshes You need the pre-compiled binary for your OS, so scroll down the page until you see those... Also don't skip the manual / overview ! It's a 2-click procedure, but you need to know what those 2 clicks are ;) CBR
  28. 2 points
    The spline should be uniform. I made this chain rig recently. chain.c4d
  29. 2 points
    The motion blur makes it for me. I feel like the body could use a bit more grime but maybe magical objects have a self cleaning mode. A display box would be cool!
  30. 2 points
    Think I'm done. Everytime I look I see things to change so that will do for now.
  31. 2 points
    Aha set to Best and that fixed it. Now the fish can swim in a fly-free bowl. Thank you so much @natevplas @Vizn
  32. 2 points
    MAXON has three conference pass tickets for FMX 2019 up for grabs. This exciting prize gives you access to all four days of FMX 2019, from April 30 to May 03. These passes normally cost 400 Euros each! Enter to win: http://maxon3d.com/win-fmx-pass/en/
  33. 2 points
    Here's one which should work for you. Just use scale instead of position. And here is the file from that brilliant tutorial. Just hook both up to Shostakovich String Quartets.....or Cake. TP Follow.c4d.zip Sound Waves 1.c4d.zip
  34. 2 points
    Hi all, I just found out about this open source photogrammetry pipeline. Seems promising! I've been using 3D Zephyr but am giving this a shot today.... https://alicevision.github.io/#
  35. 2 points
    If I may add I noticed that your Uving was set to automatic which led to multiple seams. Your cylinder part for example needs only one seam to unwrap. So one seam is obviously easier to hide. Also don't forget if you apply a non hand painted texture you're better off with a seamless/tileable texture. I attach your file with improved UVs and a procedural tileable texture. Seams.rar
  36. 2 points
    This is a very old tutorial I recorded back in Cinema 4D Release 9.6 (it was entitled "Modelling Architecture in Cinema 4D"). I took it offline a long time ago as it was outdated and not very useful anymore. I still keep getting requests for it occasionally though, which is why I have decided to re-upload it again. Sending people video files or temporarily uploading them to some file hoster was a bit of a pain. Anyone who has lost their downloads from back then or wants to revisit the tutorial can do so now. You can find the videos on Vimeo and YouTube. Cheers, contrafibbularities
  37. 2 points
    You want an HDRI that is pretty much black and white - I'd use Uffuzi from the content browser, in a filter to make it greyscale ( -100% saturation). But that might not be the only issue. It looks like you have the default light turned on. If there is no lighting in the scene that will be there until you turn it off in render options, or until you turn on GI, which replaces it. CBR
  38. 2 points
    I'd guess not if I had to, and we must remember that Object Tracking was brand new in R18, so you may have one of the earliest versions of it, which is not as capable as more recent iterations. I think best bet is just to try it and see... Captain Natester has found you the best tutorial for that sort of thing, so just get in there and see what works... CBR
  39. 2 points
    couldn't resist, these things are just too much fun ;) play with the noises in the displacer deformers to your liking, if you need more details up the subdivisions for the spline and the extrudes cap grid. rock_grass_island.c4d
  40. 2 points
    And wires for @Cerbera
  41. 2 points
    Not sure what's up with the image uploader but here are the other renders.....
  42. 2 points
    some more :) 85_Cone_peel_rig(MG+XP).c4d 88_Time_format_display(XP+MG).c4d 89_Dorito_effect(CA+MG).c4d 91_Collision_color_change(MG+Dyn).c4d
  43. 2 points
    A few hours into this Bull Ant model I posted in the members challenge area. I worked on a couple of drawings on paper and then in Procreate. I almost always do a drawing or two so I can try and figure out what shapes I'm going to be working on. After that I put a few hours into the mesh. Time to refine! @cerbera Looking forward to seeing that wasp!
  44. 2 points
    For those of you who haven't yet heard, and miss the old Ask GSG sessions, they are back, tomorrow, under Chris Schmidt's latest Project, Rocket Lasso. Bring your questions, and show him we appreciate his efforts by turning up to the first one. Kicking off 2 pm CST / 7 pm GMT this Wed on Twitch. CBR
  45. 2 points
    I wanted this for myself recently and found a script. import c4d, os from c4d import gui, documents #Welcome to the world of Python def main(): c4d.documents.LoadFile(c4d.storage.GeGetC4DPath(c4d.C4D_PATH_LIBRARY_USER)+os.sep+"layout"+os.sep+"masrs1.l4d") if __name__=='__main__': main() Just replace masrs1.l4d with your layout name. Mike
  46. 2 points
    Moving along. I think I'll do one more pass at the textures and grooming. I ended up doing the normal map and paint in Mudbox. I'm not sure if I'm a fan of that program yet but I thought I'd try it out.
  47. 2 points
    Latest wristwatch visualization for client. Software: Cinema4D, Redshift, AE
  48. 2 points
    Okay.... some errors were made. Mainly with the mouth stuff. I think it would have been better to nest this as a separate object so that it didn't add unnecessary geometry to the overall model. Live and learn. I'm going to keep on with the UV's as is and just keep that in mind next time. Don't want to turn this into my life's work!
  49. 2 points
    Two days in, still a ton to do....
  50. 2 points
    Hello, you all... ... Just a Sun...! Made only with noises... and a Sphere. Layer upon layer... and lights... seven of them. ... Cheers. ... João Marco ...

YOUTUBE CHANNEL:

ABOUT US:

C4D Cafe is the largest CINEMA 4D community. We provide facilities for discussion, showcasing and learning our favorite software :)
×
×
  • Create New...